Top 4 Mechanical Problems with Vacuums

Top 4 Mechanical Problems with Vacuums
Articles on Vacuums

Whenever we think about a good cleaning device, vacuum cleaners are definitely worth an honorable mention.

The extent to which they have eased our lives is simply amazing! When you use a good quality vacuum you can really appreciate them. When you have a vacuum breakdown, the simple vacuum job just became a major repair job. If you take care and maintain your vacuum, you can eliminate any mechanical problems that occur in vacuums.

Prior to vacuum cleaners, people used cleaning methods that took a lot of effort and an equal lot of time. Although the concept of vacuum cleaners has been around since around 1901, they were not always the way we see them today. Vacuum cleaners as we know them—the motorized vacuums—debuted in the first half of the twentieth century. Although they have evolved greatly with time, there are still a couple of problems that can commonly occur in them. Following are the top 4 mechanical problems with vacuums.

Reduced Suction

This is a very common problem found in almost all types of vacuums. This is normally due to improper care of your vacuum cleaner, especially its brush rolls. The worst part of having problems with suction in a vacuum goes beyond the problems in cleaning. It adversely affects the motor, consequently weakening it, causing it to potentially break down.

To make your vacuum cleaner work properly, the best and inexpensive way is to clean the brush rolls. With excessive usage, they can get clogged with dirt. If the brush rolls have completely worn off, you can also replace them with new ones.

Automatic Shut Downs

People often complain about their vacuum cleaners turning off while being used. This is a common problem. Although it can be a result of a number of issues including a faulty motor or full dust bag, the most common reason is a clogged filter.

Just like the brush rolls, you can clean the filter of your vacuum from time to time to avoid this issue. However, it is better to first check the actual cause of the problem before going ahead to clean the filter.

Increased Noise

Another common problem with vacuums is that sometimes they start becoming noisy. On the other hand, their suction power also decreases by a great margin. This is often the result of a defective bearing in the motor of the vacuum. If this is the case, it is normally recommended that you buy a new vacuum because having the damaged one repaired will cost more or less the same.

Worn or Broken Belts

Belts of a vacuum are some of the most normally affected areas. They tend to wear off and eventually break after a couple of months. This obviously affects the use of your vacuum cleaner. This is a very common problem with vacuums which can easily be solved through a simple repair.

However, in order to ensure better maintenance of your vacuum, it is recommended to have the belt replaced at least after every two months. You should do that even if the belt is not totally worn off since it will offer you a proper functioning vacuum cleaner for a longer time.

If you are tired of using your old vacuum cleaner, you can buy a new vacuum right here at all great vacuums. There are plenty of different types available. You can choose the one that best suits your needs.

You might also like this: How Does A Vacuum Cleaner Work?

(Visited 23 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *